143 lines
5.2 KiB
Bash
Executable File
143 lines
5.2 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
#
|
|
# Kali Linux ARM build-script for Pinebook Pro (64-bit)
|
|
# Source: https://gitlab.com/kalilinux/build-scripts/kali-arm
|
|
#
|
|
# This is a supported device - which you can find pre-generated images on: https://www.kali.org/get-kali/
|
|
# More information: https://www.kali.org/docs/arm/pinebook-pro/
|
|
#
|
|
|
|
# Hardware model
|
|
hw_model=${hw_model:-"pinebook-pro"}
|
|
# Architecture
|
|
architecture=${architecture:-"arm64"}
|
|
# Desktop manager (xfce, gnome, i3, kde, lxde, mate, e17 or none)
|
|
desktop=${desktop:-"xfce"}
|
|
|
|
# Load default base_image configs
|
|
source ./common.d/base_image.sh
|
|
|
|
# Do *NOT* include wlan0 if using a desktop otherwise NetworkManager will ignore it
|
|
# Network configs
|
|
basic_network
|
|
#add_interface wlan0
|
|
|
|
# Third stage
|
|
cat <<EOF >> "${work_dir}"/third-stage
|
|
# Do not install firmware-brcm80211, the firmware in upstream causes kernel panics.
|
|
# We use the one that armbian has in their repository at
|
|
# https://github.com/armbian/firmware/
|
|
# It uses the 43456 files.
|
|
eatmydata apt-get install -y dkms linux-image-arm64 u-boot-menu u-boot-rockchip
|
|
|
|
status_stage3 'Install bluez for bluetooth'
|
|
eatmydata apt-get install -y bluez bluez-firmware
|
|
|
|
status_stage3 'Touchpad settings'
|
|
mkdir -p /etc/X11/xorg.conf.d/
|
|
install -m644 /bsp/xorg/50-pine64-pinebook-pro.touchpad.conf /etc/X11/xorg.conf.d/
|
|
|
|
status_stage3 'Saved audio settings'
|
|
# Create the directory first, it won't exist if there is no desktop installed because alsa isn't installed.
|
|
mkdir -p /var/lib/alsa/
|
|
install -m644 /bsp/audio/pinebook-pro/asound.state /var/lib/alsa/asound.state
|
|
|
|
status_stage3 'Enable bluetooth'
|
|
systemctl enable bluetooth
|
|
|
|
status_stage3 'Enable suspend2idle'
|
|
sed -i s/"#SuspendState=mem standby freeze"/"SuspendState=freeze"/g /etc/systemd/sleep.conf
|
|
|
|
status_stage3 'Enable login over serial (No password)'
|
|
echo "T0:23:respawn:/sbin/agetty -L ttyAMA0 115200 vt100" >> /etc/inittab
|
|
|
|
status_stage3 'Fixup wireless-regdb signature'
|
|
update-alternatives --set regulatory.db /lib/firmware/regulatory.db-upstream
|
|
|
|
status_stage3 'Add in 43455 firmware for newer model Pinebook Pro'
|
|
mkdir -p /lib/firmware/brcm/
|
|
cp -a /bsp/firmware/pbp/* /lib/firmware/brcm/
|
|
EOF
|
|
|
|
# Run third stage
|
|
include third_stage
|
|
|
|
# Clean system
|
|
include clean_system
|
|
|
|
# Pull in the wifi and bluetooth firmware from Armbian's git repository
|
|
cd "${work_dir}"/
|
|
git clone --depth 1 https://github.com/armbian/firmware.git
|
|
cd firmware/
|
|
mkdir -p "${work_dir}"/lib/firmware/brcm/
|
|
cp brcm/BCM4345C5.hcd "${work_dir}"/lib/firmware/brcm/BCM4345C5.hcd
|
|
cp brcm/brcmfmac43456-sdio.txt "${work_dir}"/lib/firmware/brcm/brcmfmac43456-sdio.pine64,pinebook-pro.txt
|
|
cp brcm/brcmfmac43456-sdio.bin "${work_dir}"/lib/firmware/brcm/brcmfmac43456-sdio.bin
|
|
cp brcm/brcmfmac43456-sdio.clm_blob "${work_dir}"/lib/firmware/brcm/brcmfmac43456-sdio.clm_blob
|
|
cd "${repo_dir}/"
|
|
rm -rf "${work_dir}"/firmware
|
|
|
|
|
|
# Enable brightness up/down and sleep hotkeys and attempt to improve
|
|
# touchpad performance
|
|
status "Keyboard hotkeys"
|
|
mkdir -p "${work_dir}"/etc/udev/hwdb.d/
|
|
cat << EOF > "${work_dir}"/etc/udev/hwdb.d/10-usb-kbd.hwdb
|
|
evdev:input:b0003v258Ap001E*
|
|
KEYBOARD_KEY_700a5=brightnessdown
|
|
KEYBOARD_KEY_700a6=brightnessup
|
|
KEYBOARD_KEY_70066=sleep
|
|
EVDEV_ABS_00=::15
|
|
EVDEV_ABS_01=::15
|
|
EVDEV_ABS_35=::15
|
|
EVDEV_ABS_36=::15
|
|
EOF
|
|
|
|
# Calculate the space to create the image and create
|
|
make_image
|
|
|
|
# Create the disk partitions
|
|
status "Create the disk partitions"
|
|
parted -s "${image_dir}/${image_name}.img" mklabel msdos
|
|
parted -s -a minimal "${image_dir}/${image_name}.img" mkpart primary $fstype 32MiB 100%
|
|
|
|
# Set the partition variables
|
|
make_loop
|
|
# Create file systems
|
|
mkfs_partitions
|
|
# Make fstab.
|
|
make_fstab
|
|
|
|
# Create the dirs for the partitions and mount them
|
|
status "Create the dirs for the partitions and mount them"
|
|
mkdir -p "${base_dir}"/root/
|
|
if [[ $fstype == ext4 ]]; then
|
|
mount -t ext4 -o noatime,data=writeback,barrier=0 "${rootp}" "${base_dir}"/root
|
|
else
|
|
mount "${rootp}" "${base_dir}"/root
|
|
fi
|
|
|
|
# Ensure we don't have root=/dev/sda3 in the extlinux.conf which comes from running u-boot-menu in a cross chroot
|
|
# We do this down here because we don't know the UUID until after the image is created
|
|
status "Edit the extlinux.conf file to set root uuid and proper name"
|
|
sed -i -e "0,/root=.*/s//root=UUID=$root_uuid rootfstype=$fstype console=tty1 ro rootwait/g" "${work_dir}"/boot/extlinux/extlinux.conf
|
|
# And we remove the "GNU/Linux because we don't use it
|
|
sed -i -e "s|.*GNU/Linux Rolling|menu label Kali Linux|g" "${work_dir}"/boot/extlinux/extlinux.conf
|
|
|
|
status "Set the default options in /etc/default/u-boot"
|
|
echo 'U_BOOT_MENU_LABEL="Kali Linux"' >> "${work_dir}"/etc/default/u-boot
|
|
echo 'U_BOOT_PARAMETERS="console=tty1 ro rootwait"' >> "${work_dir}"/etc/default/u-boot
|
|
|
|
status "Rsyncing rootfs into image file"
|
|
rsync -HPavz -q "${work_dir}"/ "${base_dir}"/root/
|
|
sync
|
|
|
|
# This comes from the u-boot-rockchip package which is installed into the image, and not the build machine
|
|
# which is why the target and call look weird; u-boot-install-rockchip is just a script calling dd with the
|
|
# right options and pointing to the correct files via TARGET.
|
|
status "dd to ${loopdevice} (u-boot bootloader)"
|
|
TARGET="${work_dir}/usr/lib/u-boot/pinebook-pro-rk3399" ${work_dir}/usr/bin/u-boot-install-rockchip ${loopdevice}
|
|
|
|
# Load default finish_image configs
|
|
include finish_image
|