210 lines
8.8 KiB
Bash
Executable File
210 lines
8.8 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
#
|
|
# Kali Linux ARM build-script for NanoPi2 (32-bit)
|
|
# Source: https://gitlab.com/kalilinux/build-scripts/kali-arm
|
|
#
|
|
# This is a community script - you will need to generate your own image to use
|
|
# More information: https://www.kali.org/docs/arm/nanopi2/
|
|
#
|
|
|
|
# Hardware model
|
|
hw_model=${hw_model:-"nanopi2"}
|
|
|
|
# Architecture
|
|
architecture=${architecture:-"armhf"}
|
|
|
|
# Desktop manager (xfce, gnome, i3, kde, lxde, mate, e17 or none)
|
|
desktop=${desktop:-"xfce"}
|
|
|
|
# Load default base_image configs
|
|
source ./common.d/base_image.sh
|
|
|
|
# Network configs
|
|
basic_network
|
|
add_interface eth0
|
|
|
|
# Third stage
|
|
cat <<EOF >>"${work_dir}"/third-stage
|
|
status_stage3 'Enable login over serial'
|
|
echo "T0:23:respawn:/sbin/agetty -L ttyAMA0 115200 vt100" >> /etc/inittab
|
|
EOF
|
|
|
|
# Run third stage
|
|
include third_stage
|
|
|
|
# Clean system
|
|
include clean_system
|
|
|
|
# Calculate the space to create the image and create
|
|
make_image
|
|
|
|
# We need an older gcc because of kernel age
|
|
cd "${base_dir}"
|
|
git clone --depth 1 https://gitlab.com/kalilinux/packages/gcc-arm-linux-gnueabihf-4-7.git gcc-arm-linux-gnueabihf-4.7
|
|
|
|
# Kernel section. If you want to use a custom kernel, or configuration, replace
|
|
# them in this section
|
|
git clone --depth 1 https://github.com/friendlyarm/linux-3.4.y -b nanopi2-lollipop-mr1 ${work_dir}/usr/src/kernel
|
|
cd ${work_dir}/usr/src/kernel
|
|
git rev-parse HEAD >${work_dir}/usr/src/kernel-at-commit
|
|
touch .scmversion
|
|
export ARCH=arm
|
|
export CROSS_COMPILE="${base_dir}"/gcc-arm-linux-gnueabihf-4.7/bin/arm-linux-gnueabihf-
|
|
patch -p1 --no-backup-if-mismatch <${repo_dir}/patches/mac80211.patch
|
|
|
|
# Ugh, this patch is needed because the ethernet driver uses parts of netdev
|
|
# from a newer kernel?
|
|
patch -p1 --no-backup-if-mismatch <${repo_dir}/patches/0001-Remove-define.patch
|
|
cp ${repo_dir}/kernel-configs/nanopi2* ${work_dir}/usr/src/
|
|
cp ../nanopi2-vendor.config .config
|
|
make -j $(grep -c processor /proc/cpuinfo)
|
|
make uImage
|
|
make modules_install INSTALL_MOD_PATH=${work_dir}
|
|
|
|
# We copy this twice because you can't do symlinks on fat partitions
|
|
# Also, the uImage known as uImage.hdmi is used by uboot if hdmi output is
|
|
# detected
|
|
cp arch/arm/boot/uImage ${work_dir}/boot/uImage-720p
|
|
cp arch/arm/boot/uImage ${work_dir}/boot/uImage.hdmi
|
|
|
|
# Friendlyarm suggests staying at 720p for now
|
|
#cp ../nanopi2-1080p.config .config
|
|
#make -j $(grep -c processor /proc/cpuinfo)
|
|
#make uImage
|
|
#cp arch/arm/boot/uImage ${work_dir}/boot/uImage-1080p
|
|
#cp ../nanopi2-lcd-hd101.config .config
|
|
#make -j $(grep -c processor /proc/cpuinfo)
|
|
#make uImage
|
|
#cp arch/arm/boot/uImage ${work_dir}/boot/uImage-hd101
|
|
#cp ../nanopi2-lcd-hd700.config .config
|
|
#make -j $(grep -c processor /proc/cpuinfo)
|
|
#make uImage
|
|
#cp arch/arm/boot/uImage ${work_dir}/boot/uImage-hd700
|
|
#cp ../nanopi2-lcd.config .config
|
|
#make -j $(grep -c processor /proc/cpuinfo)
|
|
#make uImage
|
|
# The default uImage is for lcd usage, so we copy the lcd one twice
|
|
# so people have a backup in case they overwrite uImage for some reason
|
|
#cp arch/arm/boot/uImage ${work_dir}/boot/uImage-s70
|
|
#cp arch/arm/boot/uImage ${work_dir}/boot/uImage.lcd
|
|
#cp arch/arm/boot/uImage ${work_dir}/boot/uImage
|
|
cd "${base_dir}"
|
|
|
|
# FriendlyARM suggest using backports for wifi with their devices, and the
|
|
# recommended version is the 4.4.2
|
|
cd ${work_dir}/usr/src/
|
|
#wget https://www.kernel.org/pub/linux/kernel/projects/backports/stable/v4.4.2/backports-4.4.2-1.tar.xz
|
|
#tar -xf backports-4.4.2-1.tar.xz
|
|
git clone https://github.com/friendlyarm/wireless
|
|
cd wireless
|
|
cd backports-4.4.2-1
|
|
patch -p1 --no-backup-if-mismatch <${repo_dir}/patches/kali-wifi-injection-4.4.patch
|
|
cd ..
|
|
#cp ${repo_dir}/kernel-configs/backports.config .config
|
|
#make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j $(grep -c processor /proc/cpuinfo) KLIB_BUILD=${work_dir}/usr/src/kernel KLIB=${work_dir}
|
|
#make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- KLIB_BUILD=${work_dir}/usr/src/kernel KLIB=${work_dir} INSTALL_MOD_PATH=${work_dir} install
|
|
#make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- KLIB_BUILD=${work_dir}/usr/src/kernel KLIB=${work_dir} mrproper
|
|
#cp ${repo_dir}/kernel-configs/backports.config .config
|
|
XCROSS="${base_dir}"/gcc-arm-linux-gnueabihf-4.7/bin/arm-linux-gnueabihf- ANDROID=n ./build.sh -k ${work_dir}/usr/src/kernel -c nanopi2 -o ${work_dir}
|
|
cd "${base_dir}"
|
|
|
|
# Now we clean up the kernel build
|
|
cd ${work_dir}/usr/src/kernel
|
|
make mrproper
|
|
cd "${base_dir}"
|
|
|
|
# Copy over the firmware for the nanopi2/3 wifi
|
|
# At some point, nexmon could work for the device, but the support would need to
|
|
# be added to nexmon
|
|
mkdir -p ${work_dir}/lib/firmware/ap6212/
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/nvram_ap6212.txt -O ${work_dir}/lib/firmware/ap6212/nvram.txt
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/nvram_ap6212a.txt -O ${work_dir}/lib/firmware/ap6212/nvram_ap6212.txt
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/fw_bcm43438a0.bin -O ${work_dir}/lib/firmware/ap6212/fw_bcm43438a0.bin
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/fw_bcm43438a1.bin -O ${work_dir}/lib/firmware/ap6212/fw_bcm43438a1.bin
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/fw_bcm43438a0_apsta.bin -O ${work_dir}/lib/firmware/ap6212/fw_bcm43438a0_apsta.bin
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/bcm43438a0.hcd -O ${work_dir}/lib/firmware/ap6212/bcm43438a0.hcd
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/bcm43438a1.hcd -O ${work_dir}/lib/firmware/ap6212/bcm43438a1.hcd
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/config_ap6212.txt -O ${work_dir}/lib/firmware/ap6212/config.txt
|
|
cd "${base_dir}"
|
|
|
|
# Fix up the symlink for building external modules
|
|
# kernver is used so we don't need to keep track of what the current compiled
|
|
# version is
|
|
kernver=$(ls ${work_dir}/lib/modules/)
|
|
cd ${work_dir}/lib/modules/${kernver}
|
|
rm build
|
|
rm source
|
|
ln -s /usr/src/kernel build
|
|
ln -s /usr/src/kernel source
|
|
cd "${base_dir}"
|
|
|
|
# Calculate the space to create the image and create
|
|
make_image
|
|
|
|
# Create the disk partitions
|
|
status "Create the disk partitions"
|
|
parted -s "${image_dir}/${image_name}.img" mklabel msdos
|
|
parted -s "${image_dir}/${image_name}.img" mkpart primary ext2 4MiB "${bootsize}"MiB
|
|
parted -s -a minimal "${image_dir}/${image_name}.img" mkpart primary "$fstype" "${bootsize}"MiB 100%
|
|
|
|
# Set the partition variables
|
|
make_loop
|
|
|
|
# Create file systems
|
|
mkfs_partitions
|
|
|
|
# Make fstab.
|
|
make_fstab
|
|
|
|
# Create the dirs for the partitions and mount them
|
|
status "Create the dirs for the partitions and mount them"
|
|
mkdir -p "${base_dir}"/root
|
|
mount ${rootp} "${base_dir}"/root
|
|
mkdir -p "${base_dir}"/root/boot
|
|
mount ${bootp} "${base_dir}"/root/boot
|
|
|
|
echo "Rsyncing rootfs into image file"
|
|
rsync -HPavz -q ${work_dir}/ ${base_dir}/root/
|
|
|
|
# Samsung bootloaders must be signed
|
|
# These are the same steps that are done by
|
|
# https://github.com/friendlyarm/sd-fuse_nanopi2/blob/master/fusing.sh
|
|
|
|
# Download the latest prebuilt from the above url
|
|
mkdir -p "${base_dir}"/bootloader
|
|
cd "${base_dir}"/bootloader
|
|
wget 'https://github.com/friendlyarm/sd-fuse_nanopi2/blob/96e1ba9603d237d0169485801764c5ce9591bf5e/prebuilt/2ndboot.bin?raw=true' -O 2ndboot.bin
|
|
wget 'https://github.com/friendlyarm/sd-fuse_nanopi2/blob/96e1ba9603d237d0169485801764c5ce9591bf5e/prebuilt/boot.TBI?raw=true' -O boot.TBI
|
|
wget 'https://github.com/friendlyarm/sd-fuse_nanopi2/blob/96e1ba9603d237d0169485801764c5ce9591bf5e/prebuilt/bootloader' -O bootloader
|
|
#wget https://raw.githubusercontent.com/friendlyarm/sd-fuse_nanopi2/master/prebuilt/bl1-mmcboot.bin
|
|
#wget https://raw.githubusercontent.com/friendlyarm/sd-fuse_nanopi2/master/prebuilt/bl_mon.img
|
|
#wget https://raw.githubusercontent.com/friendlyarm/sd-fuse_nanopi2/master/prebuilt/bootloader.img # This is u-boot
|
|
#wget https://raw.githubusercontent.com/friendlyarm/sd-fuse_nanopi2/master/prebuilt/loader-mmc.img
|
|
wget https://raw.githubusercontent.com/friendlyarm/sd-fuse_nanopi2/master/tools/fw_printenv
|
|
chmod 0755 fw_printenv
|
|
ln -s fw_printenv fw_setenv
|
|
|
|
dd if=2ndboot.bin of=${loopdevice} bs=512 seek=1
|
|
dd if=boot.TBI of=${loopdevice} bs=512 seek=64 count=1
|
|
dd if=bootloader of=${loopdevice} bs=512 seek=65
|
|
|
|
cat <<EOF >${base_dir}/bootloader/env.conf
|
|
# U-Boot environment for Debian, Ubuntu
|
|
#
|
|
# Copyright (C) Guangzhou FriendlyARM Computer Tech. Co., Ltd
|
|
# (http://www.friendlyarm.com)
|
|
#
|
|
|
|
bootargs console=ttyAMA0,115200n8 root=/dev/mmcblk0p2 rootfstype=$fstype rootwait rw consoleblank=0 net.ifnames=0
|
|
bootdelay 1
|
|
EOF
|
|
|
|
./fw_setenv ${loopdevice} -s env.conf
|
|
|
|
sync
|
|
|
|
cd "${repo_dir}/"
|
|
|
|
# Load default finish_image configs
|
|
include finish_image
|