106 lines
3.8 KiB
Bash
Executable File
106 lines
3.8 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
#
|
|
# Kali Linux ARM build-script for NanoPi NEO Plus2 (64-bit)
|
|
# Source: https://gitlab.com/kalilinux/build-scripts/kali-arm
|
|
#
|
|
# This is a supported device - which you can find pre-generated images on: https://www.kali.org/get-kali/
|
|
# More information: https://www.kali.org/docs/arm/nanopi-neo-plus2/
|
|
#
|
|
|
|
# Hardware model
|
|
hw_model=${hw_model:-"nanopi-neo-plus2"}
|
|
|
|
# Architecture
|
|
architecture=${architecture:-"arm64"}
|
|
|
|
# Desktop manager (xfce, gnome, i3, kde, lxde, mate, e17 or none)
|
|
desktop=${desktop:-"xfce"}
|
|
|
|
# Load default base_image configs
|
|
source ./common.d/base_image.sh
|
|
|
|
# Network configs
|
|
basic_network
|
|
add_interface eth0
|
|
|
|
# Third stage
|
|
cat <<EOF >>"${work_dir}"/third-stage
|
|
status_stage3 'Install kernel and bootloader packages'
|
|
eatmydata apt-get install -y kali-sbc-allwinner linux-image-arm64 firmware-brcm80211
|
|
|
|
# Note: This just creates an empty /boot/extlinux/extlinux.conf for us to use
|
|
# later.
|
|
status_stage3 'Run u-boot-update'
|
|
u-boot-update
|
|
|
|
status_stage3 'Theres no graphical output on this device'
|
|
systemctl set-default multi-user
|
|
|
|
status_stage3 'Enable login over serial (No password)'
|
|
echo "T0:23:respawn:/sbin/agetty -L ttyAMA0 115200 vt100" >> /etc/inittab
|
|
EOF
|
|
|
|
# Run third stage
|
|
include third_stage
|
|
|
|
# Clean system
|
|
include clean_system
|
|
|
|
# Copy over the firmware for the ap6212 wifi
|
|
# On the neo plus2 default install there are other firmware files installed for
|
|
# p2p and apsta but I can't find them publicly posted to friendlyarm's GitHub
|
|
# At some point, nexmon could work for the device, but the support would need to
|
|
# be added to nexmon
|
|
status 'Clone bluetooth/wifi firmware files'
|
|
mkdir -p ${work_dir}/lib/firmware/ap6212/
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/bcm43438a0.hcd -O ${work_dir}/lib/firmware/brcm/bcm43438a0.hcd
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/bcm43438a1.hcd -O ${work_dir}/lib/firmware/brcm/bcm43438a1.hcd
|
|
wget https://raw.githubusercontent.com/friendlyarm/android_vendor_broadcom_nanopi2/nanopi2-lollipop-mr1/proprietary/nvram_ap6212.txt -O ${work_dir}/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
|
|
|
|
cd "${repo_dir}/"
|
|
|
|
# Calculate the space to create the image and create
|
|
make_image
|
|
|
|
# Create the disk partitions
|
|
status "Create the disk partitions"
|
|
parted -s "${image_dir}/${image_name}.img" mklabel msdos
|
|
parted -s -a minimal "${image_dir}/${image_name}.img" mkpart primary $fstype 32MiB 100%
|
|
|
|
# Set the partition variables
|
|
make_loop
|
|
|
|
# Create file systems
|
|
mkfs_partitions
|
|
|
|
# Make fstab.
|
|
make_fstab
|
|
|
|
# Create the dirs for the partitions and mount them
|
|
status "Create the dirs for the partitions and mount them"
|
|
mkdir -p "${base_dir}"/root/
|
|
mount "${rootp}" "${base_dir}"/root
|
|
|
|
status "Edit the extlinux.conf file to set root uuid and proper name"
|
|
|
|
# Ensure we don't have root=/dev/sda3 in the extlinux.conf which comes from running u-boot-menu in a cross chroot
|
|
# We do this down here because we don't know the UUID until after the image is created
|
|
sed -i -e "0,/root=.*/s//root=UUID=$root_uuid rootfstype=$fstype console=tty1 consoleblank=0 ro rootwait/g" ${work_dir}/boot/extlinux/extlinux.conf
|
|
|
|
# And we remove the "GNU/Linux because we don't use it
|
|
sed -i -e "s|.*GNU/Linux Rolling|menu label Kali Linux|g" ${work_dir}/boot/extlinux/extlinux.conf
|
|
|
|
status "Set the default options in /etc/default/u-boot"
|
|
echo 'U_BOOT_MENU_LABEL="Kali Linux"' >>${work_dir}/etc/default/u-boot
|
|
echo 'U_BOOT_PARAMETERS="console=tty1 consoleblank=0 ro rootwait"' >>${work_dir}/etc/default/u-boot
|
|
|
|
status "Rsyncing rootfs into image file"
|
|
rsync -HPavz -q "${work_dir}"/ "${base_dir}"/root/
|
|
sync
|
|
|
|
status "Write u-boot to the loopdevice"
|
|
TARGET="${work_dir}/usr/lib/u-boot/nanopi_neo_plus2" "${work_dir}"/usr/bin/u-boot-install-sunxi64 ${loopdevice}
|
|
|
|
# Load default finish_image configs
|
|
include finish_image
|