jiang/kali-arm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

*: ext3 :(

Browse Source
This commit is contained in:
Steev Klimaszewski
2020-05-07 15:19:48 -05:00
parent 2647c42dfc
commit b163efda82
43 changed files with 160 additions and 160 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
banana-pi.sh
View File

@@ -221,7 +221,7 @@ apt-get --yes --download-only install kali-linux-default
# We replace the u-boot menu defaults here so we can make sure the build system doesn't poison it.
# We use _EOF_ so that the third-stage script doesn't end prematurely.
cat << '_EOF_' > /etc/default/u-boot
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext4 net.ifnames=0"
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext3 net.ifnames=0"
_EOF_
rm -f /usr/sbin/policy-rc.d
@@ -281,12 +281,12 @@ sed -i -e 's/^#PermitRootLogin.*/PermitRootLogin yes/' "${basedir}"/kali-${archi
# Build system will insert it's root filesystem into the extlinux.conf file so
# we sed it out, this only affects build time, not upgrading the kernel on the
# device itself.
sed -i -e 's/append.*/append console=ttyS0,115200 console=tty1 root=\/dev\/mmcblk0p1 rootwait panic=10 rw rootfstype=ext4 net.ifnames=0/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
sed -i -e 's/append.*/append console=ttyS0,115200 console=tty1 root=\/dev\/mmcblk0p1 rootwait panic=10 rw rootfstype=ext3 net.ifnames=0/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
# Create the disk and partition it
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 2048s 100%
parted ${imagename}.img --script -- mkpart primary ext3 2048s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -296,7 +296,7 @@ device="/dev/mapper/${device}"
rootp=${device}p1
# Create file systems
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
banana-pro.sh
View File

@@ -223,7 +223,7 @@ sed -i 's/^TimeoutStartSec=5min/TimeoutStartSec=25/g' "/usr/lib/systemd/system/n
# We replace the u-boot menu defaults here so we can make sure the build system doesn't poison it.
# We use _EOF_ so that the third-stage script doesn't end prematurely.
cat << '_EOF_' > /etc/default/u-boot
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext4 net.ifnames=0"
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext3 net.ifnames=0"
_EOF_
rm -f /usr/sbin/policy-rc.d
@@ -279,12 +279,12 @@ sed -i -e 's/^#PermitRootLogin.*/PermitRootLogin yes/' "${basedir}"/kali-${archi
# Build system will insert it's root filesystem into the extlinux.conf file so
# we sed it out, this only affects build time, not upgrading the kernel on the
# device itself.
sed -i -e 's/append.*/append console=ttyS0,115200 console=tty1 root=\/dev\/mmcblk0p1 rootwait panic=10 rw rootfstype=ext4 net.ifnames=0/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
sed -i -e 's/append.*/append console=ttyS0,115200 console=tty1 root=\/dev\/mmcblk0p1 rootwait panic=10 rw rootfstype=ext3 net.ifnames=0/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
# Create the disk and partition it
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 2048s 100%
parted ${imagename}.img --script -- mkpart primary ext3 2048s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -294,7 +294,7 @@ device="/dev/mapper/${device}"
rootp=${device}p1
# Create file system
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

6
bbb.sh
View File

@@ -316,7 +316,7 @@ loadfdt=load mmc \${mmcdev}:\${mmcpart} \${fdtaddr} /dtbs/\${fdtfile}
console=ttyO0,115200n8
mmcroot=/dev/mmcblk0p2 rw net.ifnames=0
mmcrootfstype=ext4 rootwait fixrtc
mmcrootfstype=ext3 rootwait fixrtc
##To disable HDMI/eMMC...
#optargs=capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G
@@ -398,7 +398,7 @@ echo "Creating image file for ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -410,7 +410,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat -F 16 ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

4
chromebook-arm-exynos.sh
View File

@@ -488,7 +488,7 @@ cd "${basedir}"/kali-${architecture}/usr/src/kernel/arch/arm/boot
mkimage -D "-I dts -O dtb -p 2048" -f kernel-exynos.its exynos-kernel
# microSD Card
echo 'noinitrd console=tty1 quiet root=PARTUUID=%U/PARTNROFF=1 rootwait rw lsm.module_locking=0 net.ifnames=0 rootfstype=ext4' > cmdline
echo 'noinitrd console=tty1 quiet root=PARTUUID=%U/PARTNROFF=1 rootwait rw lsm.module_locking=0 net.ifnames=0 rootfstype=ext3' > cmdline
# Pulled from ChromeOS, this is exactly what they do because there's no
# bootloader in the kernel partition on ARM.
@@ -628,7 +628,7 @@ device="/dev/mapper/${device}"
bootp=${device}p1
rootp=${device}p2
mkfs.ext4 -O ^flex_bg -O ^metadata_csum -L rootfs ${rootp}
mkfs.ext3 -O ^flex_bg -O ^metadata_csum -L rootfs ${rootp}
mkdir -p "${basedir}"/root
mount ${rootp} "${basedir}"/root

4
chromebook-arm-nyan.sh
View File

@@ -419,7 +419,7 @@ cd "${basedir}"/kali-${architecture}/usr/src/kernel/arch/arm/boot
mkimage -f kernel-nyan.its nyan-big-kernel
# BEHOLD THE POWER OF PARTUUID/PARTNROFF
echo "noinitrd console=tty1 quiet root=PARTUUID=%U/PARTNROFF=1 rootwait rw lsm.module_locking=0 net.ifnames=0 rootfstype=ext4" > cmdline
echo "noinitrd console=tty1 quiet root=PARTUUID=%U/PARTNROFF=1 rootwait rw lsm.module_locking=0 net.ifnames=0 rootfstype=ext3" > cmdline
# Pulled from ChromeOS, this is exactly what they do because there's no
# # bootloader in the kernel partition on ARM.
@@ -529,7 +529,7 @@ device="/dev/mapper/${device}"
bootp=${device}p1
rootp=${device}p2
mkfs.ext4 -O ^flex_bg -O ^metadata_csum -L rootfs ${rootp}
mkfs.ext3 -O ^flex_bg -O ^metadata_csum -L rootfs ${rootp}
mkdir -p "${basedir}"/root
mount ${rootp} "${basedir}"/root

4
chromebook-arm-veyron.sh
View File

@@ -401,7 +401,7 @@ cd "${basedir}"/kali-${architecture}/usr/src/kernel/arch/arm/boot
mkimage -D "-I dts -O dtb -p 2048" -f kernel-veyron.its veyron-kernel
# BEHOLD THE MAGIC OF PARTUUID/PARTNROFF
echo 'noinitrd console=tty1 quiet root=PARTUUID=%U/PARTNROFF=1 rootwait rw lsm.module_locking=0 net.ifnames=0 rootfstype=ext4' > cmdline
echo 'noinitrd console=tty1 quiet root=PARTUUID=%U/PARTNROFF=1 rootwait rw lsm.module_locking=0 net.ifnames=0 rootfstype=ext3' > cmdline
# Pulled from ChromeOS, this is exactly what they do because there's no
# bootloader in the kernel partition on ARM.
@@ -2287,7 +2287,7 @@ device="/dev/mapper/${device}"
bootp=${device}p1
rootp=${device}p2
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum -L rootfs ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum -L rootfs ${rootp}
mkdir -p "${basedir}"/root
mount ${rootp} "${basedir}"/root

6
cubieboard2.sh
View File

@@ -294,7 +294,7 @@ cd "${basedir}"
# Create boot.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/boot.cmd
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra} rw rootfstype=ext4 net.ifnames=0
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra} rw rootfstype=ext3 net.ifnames=0
fatload mmc 0 0x43000000 script.bin
fatload mmc 0 0x48000000 uImage
bootm 0x48000000
@@ -312,7 +312,7 @@ sed -i -e 's/^#PermitRootLogin.*/PermitRootLogin yes/' "${basedir}"/kali-${archi
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -324,7 +324,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

6
cubietruck.sh
View File

@@ -295,7 +295,7 @@ cd "${basedir}"
# Create boot.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/boot.cmd
setenv bootm_boot_mode sec
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 \${extra} rw rootfstype=ext4 net.ifnames=0
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 \${extra} rw rootfstype=ext3 net.ifnames=0
fatload mmc 0 0x43000000 script.bin
fatload mmc 0 0x48000000 uImage
bootm 0x48000000
@@ -313,7 +313,7 @@ sed -i -e 's/^#PermitRootLogin.*/PermitRootLogin yes/' "${basedir}"/kali-${archi
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -325,7 +325,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
cubox-i.sh
View File

@@ -218,7 +218,7 @@ apt-get --yes --download-only install kali-linux-default
# We replace the u-boot menu defaults here so we can make sure the build system doesn't poison it.
# We use _EOF_ so that the third-stage script doesn't end prematurely.
cat << '_EOF_' > /etc/default/u-boot
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext4 net.ifnames=0"
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext3 net.ifnames=0"
_EOF_
rm -f /usr/sbin/policy-rc.d
@@ -279,12 +279,12 @@ chmod 755 "${basedir}"/kali-${architecture}/etc/init.d/zram
sed -i -e 's/^#PermitRootLogin.*/PermitRootLogin yes/' "${basedir}"/kali-${architecture}/etc/ssh/sshd_config
# Ensure we don't have root=/dev/sda3 in the extlinux.conf which comes from running u-boot-menu in a cross chroot.
sed -i -e 's/append.*/append root=\/dev\/mmcblk1p1 rootfstype=ext4 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 console=ttymxc0,115200n8 console=tty1 consoleblank=0 rw rootwait/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
sed -i -e 's/append.*/append root=\/dev\/mmcblk1p1 rootfstype=ext3 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 console=ttymxc0,115200n8 console=tty1 consoleblank=0 rw rootwait/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
echo "Creating image file for ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 2048s 100%
parted ${imagename}.img --script -- mkpart primary ext3 2048s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -294,7 +294,7 @@ device="/dev/mapper/${device}"
rootp=${device}p1
# Create file systems
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

16
cubox.sh
View File

@@ -298,21 +298,21 @@ setenv unit_no 0
setenv root_device ?
if itest.s \${device_name} -eq usb; then
itest.s \$root_device -eq ? && ext4ls usb 0:1 /dev && setenv root_device /dev/sda1 && setenv unit_no 0
itest.s \$root_device -eq ? && ext4ls usb 1:1 /dev && setenv root_device /dev/sda1 && setenv unit_no 1
itest.s \$root_device -eq ? && ext3ls usb 0:1 /dev && setenv root_device /dev/sda1 && setenv unit_no 0
itest.s \$root_device -eq ? && ext3ls usb 1:1 /dev && setenv root_device /dev/sda1 && setenv unit_no 1
fi
if itest.s \${device_name} -eq mmc; then
itest.s \$root_device -eq ? && ext4ls mmc 0:2 /dev && setenv root_device /dev/mmcblk0p2
itest.s \$root_device -eq ? && ext4ls mmc 0:1 /dev && setenv root_device /dev/mmcblk0p1
itest.s \$root_device -eq ? && ext3ls mmc 0:2 /dev && setenv root_device /dev/mmcblk0p2
itest.s \$root_device -eq ? && ext3ls mmc 0:1 /dev && setenv root_device /dev/mmcblk0p1
fi
if itest.s \${device_name} -eq ide; then
itest.s \$root_device -eq ? && ext4ls ide 0:1 /dev && setenv root_device /dev/sda1
itest.s \$root_device -eq ? && ext3ls ide 0:1 /dev && setenv root_device /dev/sda1
fi
if itest.s \$root_device -ne ?; then
setenv bootargs "console=ttyS0,115200n8 vmalloc=448M video=dovefb:lcd0:1920x1080-32@60-edid clcd.lcd0_enable=1 clcd.lcd1_enable=0 root=\${root_device} rootfstype=ext4 rw net.ifnames=0"
setenv bootargs "console=ttyS0,115200n8 vmalloc=448M video=dovefb:lcd0:1920x1080-32@60-edid clcd.lcd0_enable=1 clcd.lcd1_enable=0 root=\${root_device} rootfstype=ext3 rw net.ifnames=0"
setenv loadimage "\${fstype}load \${device_name} \${unit_no}:\${partition} 0x00200000 \${directory}\${image_name}"
\$loadimage && bootm 0x00200000
@@ -335,7 +335,7 @@ sed -i -e 's/^#PermitRootLogin.*/PermitRootLogin yes/' "${basedir}"/kali-${archi
echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 0 100%
parted ${imagename}.img --script -- mkpart primary ext3 0 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -345,7 +345,7 @@ device="/dev/mapper/${device}"
rootp=${device}p1
# Create file systems
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum -O ^64bit ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum -O ^64bit ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

6
efikamx.sh
View File

@@ -227,7 +227,7 @@ cd "${basedir}"
cat << EOF > "${basedir}"/kali-${architecture}/boot/boot.script
setenv ramdisk uInitrd;
setenv kernel uImage;
setenv bootargs console=tty1 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 rw quiet;
setenv bootargs console=tty1 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 rw quiet;
\${loadcmd} \${ramdiskaddr} \${ramdisk};
if imi \${ramdiskaddr}; then; else
setenv bootargs \${bootargs} noinitrd;
@@ -249,7 +249,7 @@ echo "Creating image file for ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext2 4096s 266239s
parted ${imagename}.img --script -- mkpart primary ext4 266240s 100%
parted ${imagename}.img --script -- mkpart primary ext3 266240s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -260,7 +260,7 @@ rootp=${device}p2
# Create file systems
mkfs.ext2 ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

16
gateworks_ventana.sh
View File

@@ -224,7 +224,7 @@ apt-get --yes --download-only install kali-linux-default
# We replace the u-boot menu defaults here so we can make sure the build system doesn't poison it.
# We use _EOF_ so that the third-stage script doesn't end prematurely.
cat << '_EOF_' > /etc/default/u-boot
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext4 net.ifnames=0"
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext3 net.ifnames=0"
_EOF_
rm -f /usr/sbin/policy-rc.d
@@ -335,7 +335,7 @@ sed -i -e 's/^#PermitRootLogin.*/PermitRootLogin yes/' "${basedir}"/kali-${archi
# Not using extlinux.conf just yet...
# Ensure we don't have root=/dev/sda3 in the extlinux.conf which comes from running u-boot-menu in a cross chroot.
#sed -i -e 's/append.*/append root=\/dev\/mmcblk0p1 rootfstype=ext4 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 console=ttymxc0,115200n8 console=tty1 consoleblank=0 rw rootwait/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
#sed -i -e 's/append.*/append root=\/dev\/mmcblk0p1 rootfstype=ext3 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 console=ttymxc0,115200n8 console=tty1 consoleblank=0 rw rootwait/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
# Create the boot script that is expected for the ventana machine
cat << '__EOF__' > "${basedir}"/kali-${architecture}/boot/6x_bootscript-ventana.script
@@ -469,17 +469,17 @@ if itest.s "x${dtype}" == "xnand" ; then
setenv fsload "ubifsload"
elif itest.s "x${dtype}" == "xmmc" ; then
echo "Booting from MMC..."
setenv root "root=/dev/mmcblk0p1 rw rootfstype=ext4 rootwait init=/lib/systemd/systemd"
setenv fsload "ext4load $dtype 0:1"
setenv root "root=/dev/mmcblk0p1 rw rootfstype=ext3 rootwait init=/lib/systemd/systemd"
setenv fsload "ext3load $dtype 0:1"
setenv rd_addr # ramdisk not needed for IMX6 MMC
elif itest.s "x${dtype}" == "xusb" ; then
echo "Booting from USB Mass Storage..."
setenv root "root=/dev/sda1 rootwait"
setenv fsload "ext4load $dtype 0:1"
setenv fsload "ext3load $dtype 0:1"
elif itest.s "x${dtype}" == "xsata" ; then
echo "Booting from SATA..."
setenv root "root=/dev/sda1 rootwait"
setenv fsload "ext4load $dtype 0:1"
setenv fsload "ext3load $dtype 0:1"
setenv rd_addr # ramdisk not needed for IMX6 AHCI SATA
fi
@@ -524,7 +524,7 @@ mkimage -A arm -T script -C none -d "${basedir}"/kali-${architecture}/boot/6x_bo
echo "Creating image file for ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 2048s 100%
parted ${imagename}.img --script -- mkpart primary ext3 2048s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -534,7 +534,7 @@ device="/dev/mapper/${device}"
rootp=${device}p1
# Create file systems
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

6
kalitap.sh
View File

@@ -327,7 +327,7 @@ loadinitrd=load mmc \${mmcdev}:\${mmcpart} \${initrd_addr} \${initrd_file}; sete
loadfdt=load mmc \${mmcdev}:\${mmcpart} \${fdtaddr} \${fdtfile}
console=ttyO0,115200n8
mmcroot=/dev/mmcblk0p2
mmcrootfstype=ext4
mmcrootfstype=ext3
mmcargs=setenv bootargs console=\${console} root=\${mmcroot} rootfstype=\${mmcrootfstype} \${optargs}
uenvcmd=run loadimage; run loadfdt; run mmcargs; bootz \${loadaddr} - \${fdtaddr}
EOF
@@ -351,7 +351,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
parted ${imagename}.img --script -- set 1 boot on
# Set the partition variables
@@ -364,7 +364,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat -F 16 ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

6
luna.sh
View File

@@ -292,7 +292,7 @@ loadfdt=load mmc \${mmcdev}:\${mmcpart} \${fdtaddr} /dtbs/\${fdtfile}
console=ttyO0,115200n8
mmcroot=/dev/mmcblk0p2 ro
mmcrootfstype=ext4 rootwait fixrtc net.ifnames=0
mmcrootfstype=ext3 rootwait fixrtc net.ifnames=0
mmcargs=setenv bootargs console=\${console} root=\${mmcroot} rootfstype=\${mmcrootfstype} \${optargs}
#zImage:
@@ -306,7 +306,7 @@ echo "Creating image file for LUNA"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -318,7 +318,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat -F 16 ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
mini-x.sh
View File

@@ -212,7 +212,7 @@ apt download fontconfig
# We replace the u-boot menu defaults here so we can make sure the build system doesn't poison it.
# We use _EOF_ so that the third-stage script doesn't end prematurely.
cat << '_EOF_' > /etc/default/u-boot
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext4 net.ifnames=0"
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext3 net.ifnames=0"
_EOF_
rm -f /usr/sbin/policy-rc.d
@@ -262,13 +262,13 @@ sed -i -e 's/^#PermitRootLogin.*/PermitRootLogin yes/' "${basedir}"/kali-${archi
# Build system will insert it's root filesystem into the extlinux.conf file so
# we sed it out, this only affects build time, not upgrading the kernel on the
# device itself.
sed -i -e 's/append.*/append console=ttyS0,115200 console=tty1 root=\/dev\/mmcblk0p1 rootwait panic=10 rw rootfstype=ext4 net.ifnames=0/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
sed -i -e 's/append.*/append console=ttyS0,115200 console=tty1 root=\/dev\/mmcblk0p1 rootwait panic=10 rw rootfstype=ext3 net.ifnames=0/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
# Create the disk and partition it
echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 2048s 100%
parted ${imagename}.img --script -- mkpart primary ext3 2048s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -278,7 +278,7 @@ device="/dev/mapper/${device}"
rootp=${device}p1
# Create file systems
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

10
nanopi2.sh
View File

@@ -393,8 +393,8 @@ let RAW_SIZE=(${RAW_SIZE_MB}*1000*1000)/${BLOCK_SIZE}
echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=${BLOCK_SIZE} count=0 seek=${RAW_SIZE}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -405,8 +405,8 @@ bootp=${device}p1
rootp=${device}p2
# Create file systems
mkfs.ext4 ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 ${bootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root
@@ -457,7 +457,7 @@ cat << EOF > ${basedir}/bootloader/env.conf
# (http://www.friendlyarm.com)
#
bootargs console=ttyAMA0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw consoleblank=0 net.ifnames=0
bootargs console=ttyAMA0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait rw consoleblank=0 net.ifnames=0
bootdelay 1
EOF

10
nanopi3.sh
View File

@@ -350,8 +350,8 @@ let RAW_SIZE=(${RAW_SIZE_MB}*1000*1000)/${BLOCK_SIZE}
echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=${BLOCK_SIZE} count=0 seek=${RAW_SIZE}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -362,8 +362,8 @@ bootp=${device}p1
rootp=${device}p2
# Create file systems
mkfs.ext4 ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 ${bootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root
@@ -411,7 +411,7 @@ cat << EOF > "${basedir}"/bootloader/env.conf
# (http://www.friendlyarm.com)
#
bootargs console=ttySAC0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw consoleblank=0 net.ifnames=0
bootargs console=ttySAC0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait rw consoleblank=0 net.ifnames=0
bootdelay 1
EOF

8
nanopineoplus2-minimal.sh
View File

@@ -477,7 +477,7 @@ fdt set ethernet0 local-mac-address \${mac_node}
fdt set mmc\${boot_mmc} boot_device <1>
setenv fbcon map:0
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=\${fsck.repair} panic=10 \${extra} fbcon=\${fbcon} ipv6.disable=1
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext3 rw rootwait fsck.repair=\${fsck.repair} panic=10 \${extra} fbcon=\${fbcon} ipv6.disable=1
#booti \${kernel_addr} \${ramdisk_addr}:500000 \${dtb_addr}
booti \${kernel_addr} - \${dtb_addr}
EOF
@@ -497,8 +497,8 @@ echo "the above is how big the sdcard needs to be"
echo "Creating image file for NanoPi NEO Plus2"
dd if=/dev/zero of=${basedir}/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 4096s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 4096s 264191s
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show ${basedir}/${imagename}.img`
@@ -510,7 +510,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p ${basedir}/root

8
nanopineoplus2.sh
View File

@@ -480,7 +480,7 @@ fdt set ethernet0 local-mac-address \${mac_node}
fdt set mmc\${boot_mmc} boot_device <1>
setenv fbcon map:0
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=\${fsck.repair} panic=10 \${extra} fbcon=\${fbcon} ipv6.disable=1
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext3 rw rootwait fsck.repair=\${fsck.repair} panic=10 \${extra} fbcon=\${fbcon} ipv6.disable=1
#booti \${kernel_addr} \${ramdisk_addr}:500000 \${dtb_addr}
booti \${kernel_addr} - \${dtb_addr}
EOF
@@ -500,8 +500,8 @@ echo "the above is how big the sdcard needs to be"
echo "Creating image file for NanoPi NEO Plus2"
dd if=/dev/zero of=${basedir}/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 4096s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 4096s 264191s
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show ${basedir}/${imagename}.img`
@@ -513,7 +513,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p ${basedir}/root

6
odroid-c.sh
View File

@@ -380,7 +380,7 @@ if test "\${hpd}" = "0"; then setenv hdmi_hpd "disablehpd=true"; fi
if test "\${cec}" = "1"; then setenv hdmi_cec "hdmitx=cecf"; fi
# Boot Arguments
setenv bootargs "root=/dev/mmcblk0p2 rootfstype=ext4 quiet rootwait rw \${condev} no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=\${m} m_bpp=\${m_bpp} vout=\${vout_mode} \${disableuhs} \${hdmi_hpd} \${hdmi_cec} \${enabledac} net.ifnames=0"
setenv bootargs "root=/dev/mmcblk0p2 rootfstype=ext3 quiet rootwait rw \${condev} no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=\${m} m_bpp=\${m_bpp} vout=\${vout_mode} \${disableuhs} \${hdmi_hpd} \${hdmi_cec} \${enabledac} net.ifnames=0"
# Booting
fatload mmc 0:1 0x21000000 uImage
@@ -533,7 +533,7 @@ echo "Creating image file for ODROID-C1"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 3072s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -545,7 +545,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

10
odroid-c2-mainline.sh
View File

@@ -416,7 +416,7 @@ setenv fdt_high "0xffffffff"
setenv kernel_filename Image
setenv fdt_filename meson-gxbb-odroidc2.dtb
if test "${devtype}" = "mmc"; then part uuid ${devtype} ${devnum}:2 rootpartuuid; fi
setenv bootargs "root=PARTUUID=${rootpartuuid} rootfstype=ext4 rootwait rw net.ifnames=0 ipv6.disable=1"
setenv bootargs "root=PARTUUID=${rootpartuuid} rootfstype=ext3 rootwait rw net.ifnames=0 ipv6.disable=1"
# Without an initramfs
setenv bootcmd "load ${devtype} ${devnum}:${partition} '${loadaddr}' '${kernel_filename}'; load ${devtype} ${devnum}:${partition} '${dtb_loadaddr}' '${fdt_filename}'; booti '${loadaddr}' - '${dtb_loadaddr}'"
# With an initramfs
@@ -439,8 +439,8 @@ let RAW_SIZE=(${RAW_SIZE_MB}*1000*1000)/${BLOCK_SIZE}
echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=${BLOCK_SIZE} count=0 seek=${RAW_SIZE}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 4096s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 4096s 264191s
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -451,8 +451,8 @@ bootp=${device}p1
rootp=${device}p2
# Create file systems
mkfs.ext4 -L boot ${bootp}
mkfs.ext4 -L rootfs ${rootp}
mkfs.ext3 -L boot ${bootp}
mkfs.ext3 -L rootfs ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

4
odroid-c2.sh
View File

@@ -685,7 +685,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -697,7 +697,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat -F 32 -n boot ${bootp}
mkfs.ext4 -O ^flex_bg -O ^metadata_csum -L rootfs ${rootp}
mkfs.ext3 -O ^flex_bg -O ^metadata_csum -L rootfs ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
odroid-u2.sh
View File

@@ -337,7 +337,7 @@ cat << EOF > "${basedir}"/kali-${architecture}/boot/boot.txt
setenv initrd_high "0xffffffff"
setenv fdt_high "0xffffffff"
setenv bootcmd "fatload mmc 0:1 0x40008000 zImage; fatload mmc 0:1 0x42000000 uInitrd; bootm 0x40008000 0x42000000"
setenv bootargs "console=tty1 console=ttySAC1,115200n8 root=/dev/mmcblk0p2 rootwait mem=2047M rw rootfstype=ext4 net.ifnames=0"
setenv bootargs "console=tty1 console=ttySAC1,115200n8 root=/dev/mmcblk0p2 rootwait mem=2047M rw rootfstype=ext3 net.ifnames=0"
boot
EOF
@@ -356,7 +356,7 @@ echo "Creating image file for ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -368,8 +368,8 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
# Disable 64bit on ext4 because the u-boot from 2010 is too old.
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Disable 64bit on ext3 because the u-boot from 2010 is too old.
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

6
odroid-w-devkit.sh
View File

@@ -293,7 +293,7 @@ cd "${basedir}"
# Create cmdline.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext4 rootwait fbcon=map:10 net.ifnames=0 rw
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext3 rootwait fbcon=map:10 net.ifnames=0 rw
EOF
# Create config.txt file
@@ -374,7 +374,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 64
parted ${imagename}.img --script -- mkpart primary ext4 64 -1
parted ${imagename}.img --script -- mkpart primary ext3 64 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -386,7 +386,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

6
odroid-w.sh
View File

@@ -289,7 +289,7 @@ cd "${basedir}"
# Create cmdline.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext4 rootwait net.ifnames=0 rw
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext3 rootwait net.ifnames=0 rw
EOF
# rpi-wiggle
@@ -309,7 +309,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 64
parted ${imagename}.img --script -- mkpart primary ext4 64 -1
parted ${imagename}.img --script -- mkpart primary ext3 64 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -321,7 +321,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
odroid-xu.sh
View File

@@ -358,7 +358,7 @@ setenv fb_x_res "1280"
setenv fb_y_res "720"
setenv hdmi_phy_res "720"
setenv bootcmd "fatload mmc 0:1 0x40008000 zImage; fatload mmc 0:1 0x42000000 uInitrd; bootz 0x40008000 0x42000000"
setenv bootargs "console=tty1 console=ttySAC2,115200n8 vmalloc=512M fb_x_res=\${fb_x_res} fb_y_res=\${fb_y_res} hdmi_phy_res=\${hdmi_phy_res} vout=hdmi led_blink=1 fake_fb=true root=/dev/mmcblk0p2 rootwait rootfstype=ext4 rw net.ifnames=0"
setenv bootargs "console=tty1 console=ttySAC2,115200n8 vmalloc=512M fb_x_res=\${fb_x_res} fb_y_res=\${fb_y_res} hdmi_phy_res=\${hdmi_phy_res} vout=hdmi led_blink=1 fake_fb=true root=/dev/mmcblk0p2 rootwait rootfstype=ext3 rw net.ifnames=0"
boot
EOF
@@ -369,7 +369,7 @@ setenv fb_x_res "1920"
setenv fb_y_res "1080"
setenv hdmi_phy_res "1080"
setenv bootcmd "fatload mmc 0:1 0x40008000 zImage; fatload mmc 0:1 0x42000000 uInitrd; bootz 0x40008000 0x42000000"
setenv bootargs "console=tty1 console=ttySAC2,115200n8 vmalloc=512M fb_x_res=\${fb_x_res} fb_y_res=\${fb_y_res} hdmi_phy_res=\${hdmi_phy_res} vout=hdmi led_blink=1 fake_fb=true root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 net.ifnames=0"
setenv bootargs "console=tty1 console=ttySAC2,115200n8 vmalloc=512M fb_x_res=\${fb_x_res} fb_y_res=\${fb_y_res} hdmi_phy_res=\${hdmi_phy_res} vout=hdmi led_blink=1 fake_fb=true root=/dev/mmcblk0p2 rootwait rw rootfstype=ext3 net.ifnames=0"
boot
EOF
@@ -390,7 +390,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 3072s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -402,7 +402,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

6
odroid-xu3.sh
View File

@@ -318,7 +318,7 @@ setenv macaddr "00:1e:06:61:7a:39"
#------------------------------------------------------------------------------------------------------
# Basic Ubuntu Setup. Don't touch unless you know what you are doing.
# --------------------------------
setenv bootrootfs "console=tty1 console=ttySAC2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 net.ifnames=0 rw"
setenv bootrootfs "console=tty1 console=ttySAC2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 net.ifnames=0 rw"
# boot commands
# Uncomment the following if you use an initrd
@@ -369,7 +369,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 3072s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -381,7 +381,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

4
pinebook-pro.sh
View File

@@ -839,7 +839,7 @@ EOF
echo "Creating image file for ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 2048s 100%
parted ${imagename}.img --script -- mkpart primary ext3 2048s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -849,7 +849,7 @@ device="/dev/mapper/${device}"
rootp=${device}p1
# Create file systems
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
pinebook.sh
View File

@@ -241,7 +241,7 @@ apt --yes --download-only install kali-linux-default
# We replace the u-boot menu defaults here so we can make sure the build system doesn't poison it.
# We use _EOF_ so that the third-stage script doesn't end prematurely.
cat << '_EOF_' > /etc/default/u-boot
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext4 net.ifnames=0"
U_BOOT_PARAMETERS="console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait panic=10 rw rootfstype=ext3 net.ifnames=0"
U_BOOT_MENU_LABEL="Kali Linux"
_EOF_
@@ -350,12 +350,12 @@ chmod 755 "${basedir}"/kali-${architecture}/etc/init.d/zram
sed -i -e 's/^#PermitRootLogin.*/PermitRootLogin yes/' "${basedir}"/kali-${architecture}/etc/ssh/sshd_config
# Ensure we don't have root=/dev/sda3 in the extlinux.conf which comes from running u-boot-menu in a cross chroot.
sed -i -e 's/append.*/append root=\/dev\/mmcblk0p1 rootfstype=ext4 console=ttyS0,115200 console=tty1 consoleblank=0 rw rootwait/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
sed -i -e 's/append.*/append root=\/dev\/mmcblk0p1 rootfstype=ext3 console=ttyS0,115200 console=tty1 consoleblank=0 rw rootwait/g' "${basedir}"/kali-${architecture}/boot/extlinux/extlinux.conf
echo "Creating image file for ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext4 2048s 100%
parted ${imagename}.img --script -- mkpart primary ext3 2048s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -365,7 +365,7 @@ device="/dev/mapper/${device}"
rootp=${device}p1
# Create file systems
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

6
riot.sh
View File

@@ -318,7 +318,7 @@ cd "${basedir}"
#loadkernel=load \${dtype} \${disk}:1 \${loadaddr} zImage
#bargs=setenv bootargs console=ttymxc1,115200n8 rootwait root=PARTUUID=\${btpart} net.ifnames=0 rootfstype=ext4
#bargs=setenv bootargs console=ttymxc1,115200n8 rootwait root=PARTUUID=\${btpart} net.ifnames=0 rootfstype=ext3
#loadfdt=load \${dtype} \${disk}:1 0x11000000 \${fdt_file}
@@ -335,7 +335,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -347,7 +347,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
rpi-hyperpixel.sh
View File

@@ -354,7 +354,7 @@ cd "${basedir}"
# Create cmdline.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext4 rootwait net.ifnames=0
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext3 rootwait net.ifnames=0
EOF
# systemd doesn't seem to be generating the fstab properly for some people, so
@@ -362,7 +362,7 @@ EOF
cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/mmcblk0p2 / ext4 errors=remount-ro 0 1
/dev/mmcblk0p2 / ext3 errors=remount-ro 0 1
# Change this if you add a swap partition or file
#/dev/SWAP none swap sw 0 0
/dev/mmcblk0p1 /boot vfat noauto 0 0
@@ -416,7 +416,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -428,7 +428,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
rpi-tft.sh
View File

@@ -308,7 +308,7 @@ EOF
# Create cmdline.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext4 rootwait net.ifnames=0
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext3 rootwait net.ifnames=0
EOF
# systemd doesn't seem to be generating the fstab properly for some people, so
@@ -316,7 +316,7 @@ EOF
cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/mmcblk0p2 / ext4 errors=remount-ro 0 1
/dev/mmcblk0p2 / ext3 errors=remount-ro 0 1
# Change this if you add a swap partition or file
#/dev/SWAP none swap sw 0 0
/dev/mmcblk0p1 /boot vfat noauto 0 0
@@ -350,7 +350,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -362,7 +362,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
rpi.sh
View File

@@ -325,7 +325,7 @@ cd "${basedir}"
# Create cmdline.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext4 rootwait net.ifnames=0
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 elevator=deadline root=/dev/mmcblk0p2 rootfstype=ext3 rootwait net.ifnames=0
EOF
# systemd doesn't seem to be generating the fstab properly for some people, so
@@ -333,7 +333,7 @@ EOF
cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/mmcblk0p2 / ext4 errors=remount-ro 0 1
/dev/mmcblk0p2 / ext3 errors=remount-ro 0 1
# Change this if you add a swap partition or file
#/dev/SWAP none swap sw 0 0
/dev/mmcblk0p1 /boot vfat noauto 0 0
@@ -362,7 +362,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -374,7 +374,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
rpi0w-nexmon-minimal.sh
View File

@@ -395,7 +395,7 @@ chmod 755 "${basedir}"/kali-${architecture}/usr/bin/kalipi-config
# Create cmdline.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 elevator=deadline fsck.repair=yes rootwait
EOF
# systemd doesn't seem to be generating the fstab properly for some people, so
@@ -404,7 +404,7 @@ cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
/dev/mmcblk0p2 / ext3 defaults,noatime 0 1
EOF
# rpi-wiggle
@@ -435,7 +435,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -447,7 +447,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
rpi0w-nexmon-p4wnp1-aloa.sh
View File

@@ -309,7 +309,7 @@ systemctl enable fake-hwclock
# Create cmdline.txt file
mkdir -p /boot
echo "dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait" > /boot/cmdline.txt
echo "dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 elevator=deadline fsck.repair=yes rootwait" > /boot/cmdline.txt
# Install P4wnP1 A.L.O.A.
cd /root/P4wnP1
@@ -478,7 +478,7 @@ cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
/dev/mmcblk0p2 / ext3 defaults,noatime 0 1
EOF
@@ -530,7 +530,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -542,7 +542,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
rpi0w-nexmon.sh
View File

@@ -392,7 +392,7 @@ chmod 755 "${basedir}"/kali-${architecture}/usr/bin/kalipi-config
# Create cmdline.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 elevator=deadline fsck.repair=yes rootwait
EOF
# systemd doesn't seem to be generating the fstab properly for some people, so
@@ -401,7 +401,7 @@ cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
/dev/mmcblk0p2 / ext3 defaults,noatime 0 1
EOF
# rpi-wiggle
@@ -432,7 +432,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -444,7 +444,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
rpi2.sh
View File

@@ -324,7 +324,7 @@ EOF
# Create cmdline.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rootflags=noload net.ifnames=0
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait rootflags=noload net.ifnames=0
EOF
# systemd doesn't seem to be generating the fstab properly for some people, so
@@ -333,7 +333,7 @@ cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
/dev/mmcblk0p2 / ext3 defaults,noatime 0 1
# This is a bit of a hack because of using Debian's raspi3-firmware package.
tmpfs /boot/firmware tmpfs rw 0 0
EOF
@@ -393,7 +393,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -405,7 +405,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root

8
rpi3-64-lite.sh
View File

@@ -346,7 +346,7 @@ EOF
# Create cmdline.txt file
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rootflags=noload net.ifnames=0
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait rootflags=noload net.ifnames=0
EOF
# systemd doesn't seem to be generating the fstab properly for some people, so
@@ -355,7 +355,7 @@ cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
/dev/mmcblk0p2 / ext3 defaults,noatime 0 1
EOF
# Copy a default config, with everything commented out so people find it when
@@ -414,7 +414,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=${BLOCK_SIZE} count=0 seek=${RAW_SIZE}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -426,7 +426,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root/

8
rpi3-debian.sh
View File

@@ -349,7 +349,7 @@ echo "T0:23:respawn:/sbin/agetty -L ttyAMA0 115200 vt100" >> "${basedir}"/kali-$
cd "${basedir}"
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rootflags=noload net.ifnames=0
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait rootflags=noload net.ifnames=0
EOF
#cat << EOF > "${basedir}"/kali-${architecture}/etc/apt/sources.list
@@ -363,7 +363,7 @@ cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
/dev/mmcblk0p2 / ext3 defaults,noatime 0 1
EOF
# Copy a default config, with everything commented out so people find it when
@@ -407,7 +407,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=${BLOCK_SIZE} count=0 seek=${RAW_SIZE}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -419,7 +419,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root/

8
rpi3-nexmon-hyperpixel.sh
View File

@@ -353,7 +353,7 @@ echo "T0:23:respawn:/sbin/agetty -L ttyAMA0 115200 vt100" >> "${basedir}"/kali-$
cd "${basedir}"
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rootflags=noload net.ifnames=0
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait rootflags=noload net.ifnames=0
EOF
cat << EOF > "${basedir}"/kali-${architecture}/etc/apt/sources.list
@@ -367,7 +367,7 @@ cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
/dev/mmcblk0p2 / ext3 defaults,noatime 0 1
# This is a bit of a hack because of using Debian's raspi3-firmware package.
tmpfs /boot/firmware tmpfs rw 0 0
EOF
@@ -481,7 +481,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -493,7 +493,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root/

8
rpi3-nexmon.sh
View File

@@ -355,7 +355,7 @@ echo "T0:23:respawn:/sbin/agetty -L ttyAMA0 115200 vt100" >> "${basedir}"/kali-$
cd "${basedir}"
cat << EOF > "${basedir}"/kali-${architecture}/boot/cmdline.txt
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rootflags=noload net.ifnames=0
dwc_otg.fiq_fix_enable=2 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait rootflags=noload net.ifnames=0
EOF
cat << EOF > "${basedir}"/kali-${architecture}/etc/apt/sources.list
@@ -369,7 +369,7 @@ cat << EOF > "${basedir}"/kali-${architecture}/etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
/dev/mmcblk0p2 / ext3 defaults,noatime 0 1
EOF
# Copy a default config, with everything commented out so people find it when
@@ -412,7 +412,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=${BLOCK_SIZE} count=0 seek=${RAW_SIZE}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 0 128
parted ${imagename}.img --script -- mkpart primary ext4 128 -1
parted ${imagename}.img --script -- mkpart primary ext3 128 -1
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -424,7 +424,7 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
mkfs.ext4 ${rootp}
mkfs.ext3 ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root/

4
trimslice.sh
View File

@@ -317,7 +317,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary ext2 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -329,7 +329,7 @@ rootp=${device}p2
# Create file systems
mkfs.ext2 ${bootp}
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/bootp "${basedir}"/root

8
utilite.sh
View File

@@ -331,7 +331,7 @@ cd "${basedir}"
# Create a file to set up our u-boot environment
cat << EOF > "${basedir}"/kali-${architecture}/boot/boot.txt
setenv mmcdev 2
setenv bootargs 'earlyprintk console=ttymxc3,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait net.ifnames=0'
setenv bootargs 'earlyprintk console=ttymxc3,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 rw rootwait net.ifnames=0'
setenv loadaddr 0x10800000
setenv fdtaddr 0x15000000
setenv bootm_low 0x15000000
@@ -366,7 +366,7 @@ echo "Creating image file ${imagename}.img"
dd if=/dev/zero of="${basedir}"/${imagename}.img bs=1M count=${size}
parted ${imagename}.img --script -- mklabel msdos
parted ${imagename}.img --script -- mkpart primary fat32 2048s 264191s
parted ${imagename}.img --script -- mkpart primary ext4 264192s 100%
parted ${imagename}.img --script -- mkpart primary ext3 264192s 100%
# Set the partition variables
loopdevice=`losetup -f --show "${basedir}"/${imagename}.img`
@@ -378,9 +378,9 @@ rootp=${device}p2
# Create file systems
mkfs.vfat ${bootp}
# The utilite uses an older kernel, and newer mkfs tools add extras to ext4, so
# The utilite uses an older kernel, and newer mkfs tools add extras to ext3, so
# we disable them otherwise there will be a kernel panic at boot.
mkfs.ext4 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
mkfs.ext3 -O ^64bit -O ^flex_bg -O ^metadata_csum ${rootp}
# Create the dirs for the partitions and mount them
mkdir -p "${basedir}"/root