189 lines
6.7 KiB
Bash
Executable File
189 lines
6.7 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
#
|
|
# Kali Linux ARM build-script for ODROID-XU3 (32-bit)
|
|
# Source: https://gitlab.com/kalilinux/build-scripts/kali-arm
|
|
#
|
|
# This is a supported device - which you can find pre-generated images on: https://www.kali.org/get-kali/
|
|
# More information: https://www.kali.org/docs/arm/odroid-xu3/
|
|
#
|
|
|
|
# Hardware model
|
|
hw_model=${hw_model:-"odroid-xu3"}
|
|
# Architecture
|
|
architecture=${architecture:-"armhf"}
|
|
# Desktop manager (xfce, gnome, i3, kde, lxde, mate, e17 or none)
|
|
desktop=${desktop:-"xfce"}
|
|
|
|
# Load default base_image configs
|
|
source ./common.d/base_image.sh
|
|
|
|
# Network configs
|
|
basic_network
|
|
add_interface eth0
|
|
|
|
# Third stage
|
|
cat <<EOF >> "${work_dir}"/third-stage
|
|
status_stage3 'Enable ttySAC2 in udev links config'
|
|
cat << __EOF__ >> /etc/udev/links.conf
|
|
M ttySAC2 c 5 1
|
|
__EOF__
|
|
|
|
status_stage3 'Enable root login on serial'
|
|
cat << _EOF_ >> /etc/securetty
|
|
ttySAC0
|
|
ttySAC1
|
|
ttySAC2
|
|
_EOF_
|
|
|
|
status_stage3 'Serial console settings'
|
|
# (Auto login on serial console)
|
|
#T1:12345:respawn:/sbin/agetty 115200 ttySAC2 vt100 >> /etc/inittab
|
|
# (No auto login)
|
|
#T1:12345:respawn:/bin/login -f root ttySAC2 /dev/ttySAC2 2>&1' >> /etc/inittab
|
|
# Make sure ttySACX is in root/etc/securetty so root can login on serial console below
|
|
echo 'T1:12345:respawn:/bin/login -f root ttySAC2 /dev/ttySAC2 2>&1' >> /etc/inittab
|
|
|
|
status_stage3 'Enable login over serial (No password)'
|
|
echo "T0:23:respawn:/sbin/agetty -L ttySAC2 115200 vt100" >> /etc/inittab
|
|
|
|
status_stage3 'Fixup wireless-regdb signature'
|
|
update-alternatives --set regulatory.db /lib/firmware/regulatory.db-upstream
|
|
EOF
|
|
|
|
# Run third stage
|
|
include third_stage
|
|
|
|
# Clean system
|
|
include clean_system
|
|
|
|
# Kernel section. If you want to use a custom kernel, or configuration, replace
|
|
# them in this section
|
|
status "Kernel stuff"
|
|
git clone --depth 1 -b odroidxu4-4.14.y https://github.com/hardkernel/linux.git ${work_dir}/usr/src/kernel
|
|
cd ${work_dir}/usr/src/kernel
|
|
git rev-parse HEAD > ${work_dir}/usr/src/kernel-at-commit
|
|
patch -p1 --no-backup-if-mismatch < ${repo_dir}/patches/kali-wifi-injection-4.14.patch
|
|
patch -p1 --no-backup-if-mismatch < ${repo_dir}/patches/0001-wireless-carl9170-Enable-sniffer-mode-promisc-flag-t.patch
|
|
touch .scmversion
|
|
export ARCH=arm
|
|
export CROSS_COMPILE=arm-linux-gnueabihf-
|
|
cp ${repo_dir}/kernel-configs/odroid-xu3.config .config
|
|
cp ${repo_dir}/kernel-configs/odroid-xu3.config ../odroid-xu3.config
|
|
make -j $(grep -c processor /proc/cpuinfo)
|
|
make modules_install INSTALL_MOD_PATH=${work_dir}
|
|
cp arch/arm/boot/zImage ${work_dir}/boot
|
|
cp arch/arm/boot/dts/exynos5422-odroidxu3.dtb ${work_dir}/boot
|
|
cp arch/arm/boot/dts/exynos5422-odroidxu3-lite.dtb ${work_dir}/boot
|
|
cp arch/arm/boot/dts/exynos5422-odroidxu4.dtb ${work_dir}/boot
|
|
cp arch/arm/boot/dts/exynos5422-odroidxu4-kvm.dtb ${work_dir}/boot
|
|
make mrproper
|
|
cp ${repo_dir}/kernel-configs/odroid-xu3.config .config
|
|
cp ${repo_dir}/kernel-configs/odroid-xu3.config ../odroid-xu3.config
|
|
cd "${base_dir}"
|
|
|
|
# Fix up the symlink for building external modules
|
|
# kernver is used so we don't need to keep track of what the current compiled
|
|
# version is
|
|
kernver=$(ls ${work_dir}/lib/modules/)
|
|
cd ${work_dir}/lib/modules/${kernver}
|
|
rm build
|
|
rm source
|
|
ln -s /usr/src/kernel build
|
|
ln -s /usr/src/kernel source
|
|
|
|
status "/boot/boot.ini"
|
|
cat << EOF > ${work_dir}/boot/boot.ini
|
|
ODROIDXU-UBOOT-CONFIG
|
|
|
|
# U-Boot Parameters
|
|
setenv initrd_high "0xffffffff"
|
|
setenv fdt_high "0xffffffff"
|
|
|
|
# Mac address configuration
|
|
setenv macaddr "00:1e:06:61:7a:39"
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
# Basic Ubuntu Setup. Don't touch unless you know what you are doing
|
|
# --------------------------------
|
|
setenv bootrootfs "console=tty1 console=ttySAC2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=$fstype net.ifnames=0 rw"
|
|
|
|
# boot commands
|
|
# Uncomment the following if you use an initrd
|
|
#setenv bootcmd "fatload mmc 0:1 0x40008000 zImage; fatload mmc 0:1 0x42000000 uInitrd; fatload mmc 0:1 0x44000000 exynos5422-odroidxu3.dtb; bootz 0x40008000 0x42000000 0x44000000"
|
|
# Uncomment the following if you do NOT use an initrd
|
|
setenv bootcmd "fatload mmc 0:1 0x40008000 zImage; fatload mmc 0:1 0x42000000 uInitrd; fatload mmc 0:1 0x44000000 exynos5422-odroidxu3.dtb; bootz 0x40008000 - 0x44000000"
|
|
|
|
# --- Screen Configuration for HDMI --- #
|
|
# ---------------------------------------
|
|
# Uncomment only ONE line! Leave all commented for automatic selection
|
|
# Uncomment only the setenv line!
|
|
# ---------------------------------------
|
|
# ODROID-VU forced resolution
|
|
# setenv videoconfig "video=HDMI-A-1:1280x800@60"
|
|
# -----------------------------------------------
|
|
# 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
|
|
# setenv videoconfig "video=HDMI-A-1:1920x1080@60"
|
|
# -----------------------------------------------
|
|
# 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
|
|
# -----------------------------------------------
|
|
# 1280x720 (720P) with monitor provided EDID information. (720p-edid)
|
|
# setenv videoconfig "video=HDMI-A-1:1280x720@60"
|
|
# -----------------------------------------------
|
|
# 1280x720 (720P) without monitor data using generic information (720p-noedid)
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
|
|
# -----------------------------------------------
|
|
# 1024x768 without monitor data using generic information
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
|
|
|
|
# final boot args
|
|
setenv bootargs "\${bootrootfs} \${videoconfig} smsc95xx.macaddr=\${macaddr}"
|
|
# drm.debug=0xff
|
|
# Boot the board
|
|
boot
|
|
EOF
|
|
|
|
cd "${repo_dir}/"
|
|
|
|
# Calculate the space to create the image and create
|
|
make_image
|
|
|
|
# Create the disk and partition it
|
|
echo "Creating image file ${image_name}.img"
|
|
parted -s "${image_dir}/${image_name}.img" mklabel msdos
|
|
parted -s "${image_dir}/${image_name}.img" mkpart primary fat32 4MiB ${bootsize}MiB
|
|
parted -s -a minimal "${image_dir}/${image_name}.img" mkpart primary $fstype ${bootsize}MiB 100%
|
|
|
|
# Set the partition variables
|
|
make_loop
|
|
# Create file systems
|
|
mkfs_partitions
|
|
# Make fstab.
|
|
make_fstab
|
|
|
|
# Create the dirs for the partitions and mount them
|
|
status "Create the dirs for the partitions and mount them"
|
|
mkdir -p "${base_dir}"/root/
|
|
mount "${rootp}" "${base_dir}"/root
|
|
mkdir -p "${base_dir}"/root/boot
|
|
mount "${bootp}" "${base_dir}"/root/boot
|
|
|
|
status "Rsyncing rootfs into image file"
|
|
rsync -HPavz -q "${work_dir}"/ "${base_dir}"/root/
|
|
sync
|
|
|
|
# Write the signed u-boot binary to the image so that it will boot
|
|
status "u-Boot"
|
|
cd "${base_dir}"
|
|
git clone --depth 1 -b odroidxu4-v2017.05 https://github.com/hardkernel/u-boot.git "${base_dir}"/u-boot
|
|
cd "${base_dir}"/u-boot
|
|
alias python=python3
|
|
make odroid-xu4_defconfig
|
|
make
|
|
cd sd_fuse
|
|
sh sd_fusing.sh ${loopdevice}
|
|
cd "${repo_dir}/"
|
|
|
|
# Load default finish_image configs
|
|
include finish_image
|