pinebookpro: Bump to 5.7 kernel

patches/pinebook-pro/0008-board-rockpi4-dts-upper-port-host.patch

@@ -0,0 +1,463 @@
+diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+index d02d053..ed2e44d 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+@@ -93,7 +93,7 @@
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&vcc5v0_typec_en>;
+ 		regulator-name = "vcc5v0_typec";
+-		regulator-always-on;
++	//	regulator-always-on;
+ 		vin-supply = <&vcc5v0_sys>;
+ 	};
+ 
+@@ -631,6 +631,7 @@
+ 	status = "okay";
+ 
+ 	u2phy0_otg: otg-port {
++		vbus-supply = <&vcc5v0_typec>;
+ 		status = "okay";
+ 	};
+ 
+@@ -696,6 +697,7 @@
+ 
+ &usbdrd_dwc3_0 {
+ 	status = "okay";
++	extcon = <&u2phy0>;
+ 	dr_mode = "otg";
+ };
+ 
+
+diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+index eae865f..20d79232 100644
+--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
++++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+@@ -69,6 +69,7 @@ enum usb_chg_state {
+ static const unsigned int rockchip_usb2phy_extcon_cable[] = {
+ 	EXTCON_USB,
+ 	EXTCON_USB_HOST,
++	EXTCON_USB_VBUS_EN,
+ 	EXTCON_CHG_USB_SDP,
+ 	EXTCON_CHG_USB_CDP,
+ 	EXTCON_CHG_USB_DCP,
+@@ -129,13 +130,29 @@ struct rockchip_usb2phy_port_cfg {
+ 	struct usb2phy_reg	bvalid_det_en;
+ 	struct usb2phy_reg	bvalid_det_st;
+ 	struct usb2phy_reg	bvalid_det_clr;
++	struct usb2phy_reg	bypass_dm_en;
++	struct usb2phy_reg	bypass_sel;
++	struct usb2phy_reg	bypass_iomux;
++	struct usb2phy_reg	bypass_bc;
++	struct usb2phy_reg	bypass_otg;
++	struct usb2phy_reg	bypass_host;
+ 	struct usb2phy_reg	ls_det_en;
+ 	struct usb2phy_reg	ls_det_st;
+ 	struct usb2phy_reg	ls_det_clr;
++	struct usb2phy_reg	iddig_output;
++	struct usb2phy_reg	iddig_en;
++	struct usb2phy_reg	idfall_det_en;
++	struct usb2phy_reg	idfall_det_st;
++	struct usb2phy_reg	idfall_det_clr;
++	struct usb2phy_reg	idrise_det_en;
++	struct usb2phy_reg	idrise_det_st;
++	struct usb2phy_reg	idrise_det_clr;
+ 	struct usb2phy_reg	utmi_avalid;
+ 	struct usb2phy_reg	utmi_bvalid;
++	struct usb2phy_reg	utmi_iddig;
+ 	struct usb2phy_reg	utmi_ls;
+ 	struct usb2phy_reg	utmi_hstdet;
++	struct usb2phy_reg	vbus_det_en;
+ };
+ 
+
+@@ -178,13 +195,16 @@ struct rockchip_usb2phy_port {
+ 	unsigned int	port_id;
+ 	bool		suspended;
+ 	bool		vbus_attached;
++	bool        vbus_enabled;
+ 	int		bvalid_irq;
+ 	int		ls_irq;
+ 	int		otg_mux_irq;
++	int		id_irq;
+ 	struct mutex	mutex;
+ 	struct		delayed_work chg_work;
+ 	struct		delayed_work otg_sm_work;
+ 	struct		delayed_work sm_work;
++	struct      regulator *vbus;
+ 	const struct	rockchip_usb2phy_port_cfg *port_cfg;
+ 	struct notifier_block	event_nb;
+ 	enum usb_otg_state	state;
+@@ -214,6 +234,7 @@ struct rockchip_usb2phy {
+ 	struct clk	*clk;
+ 	struct clk	*clk480m;
+ 	struct clk_hw	clk480m_hw;
++	bool            edev_self;
+ 	enum usb_chg_state	chg_state;
+ 	enum power_supply_type	chg_type;
+ 	u8			dcd_retries;
+@@ -393,6 +414,8 @@ static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
+ 			dev_err(rphy->dev, "failed to register extcon device\n");
+ 			return ret;
+ 		}
++
++		rphy->edev_self = true;
+ 	}
+ 
+ 	rphy->edev = edev;
+@@ -400,6 +423,28 @@ static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
+ 	return 0;
+ }
+ 
++static int rockchip_set_vbus_power(struct rockchip_usb2phy_port *rport,bool en)
++{
++	int ret = 0;
++
++	if (!rport->vbus)
++		return 0;
++
++	if (en && !rport->vbus_enabled) {
++		ret = regulator_enable(rport->vbus);
++		if (ret)
++			dev_err(&rport->phy->dev,
++					"Failed to enable VBUS supply\n");
++		} else if (!en && rport->vbus_enabled) {
++			ret = regulator_disable(rport->vbus);
++		}
++
++	if (ret == 0)
++		rport->vbus_enabled = en;
++
++	return ret;
++}
++
+ static int rockchip_usb2phy_init(struct phy *phy)
+ {
+ 	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+@@ -407,10 +452,11 @@ static int rockchip_usb2phy_init(struct phy *phy)
+ 	int ret = 0;
+ 
+ 	mutex_lock(&rport->mutex);
+-
++printk("busb rport->port_id=%d\n",rport->port_id );
+ 	if (rport->port_id == USB2PHY_PORT_OTG) {
+ 		if (rport->mode != USB_DR_MODE_HOST &&
+ 		    rport->mode != USB_DR_MODE_UNKNOWN) {
++			printk("busb enabled irq\n");
+ 			/* clear bvalid status and enable bvalid detect irq */
+ 			ret = property_enable(rphy->grf,
+ 					      &rport->port_cfg->bvalid_det_clr,
+@@ -423,9 +469,34 @@ static int rockchip_usb2phy_init(struct phy *phy)
+ 					      true);
+ 			if (ret)
+ 				goto out;
++		
++			/* clear id status and enable id detect irq */
++			ret = property_enable(rphy->grf,
++					      &rport->port_cfg->idfall_det_clr,
++					      true);
++			if (ret)
++				goto out;
++
++			ret = property_enable(rphy->grf,
++					      &rport->port_cfg->idfall_det_en,
++					      true);
++			if (ret)
++				goto out;
++
++			ret = property_enable(rphy->grf,
++					      &rport->port_cfg->idrise_det_clr,
++					      true);
++			if (ret)
++				goto out;
++
++			ret = property_enable(rphy->grf,
++					      &rport->port_cfg->idrise_det_en,
++					      true);
++			if (ret)
++				goto out;
+ 
+ 			schedule_delayed_work(&rport->otg_sm_work,
+					      OTG_SCHEDULE_DELAY * 3);
+ 		} else {
+ 			/* If OTG works in host only mode, do nothing. */
+ 			dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode);
+@@ -458,7 +529,7 @@ static int rockchip_usb2phy_power_on(struct phy *phy)
+ 	int ret;
+ 
+ 	dev_dbg(&rport->phy->dev, "port power on\n");
+-
++printk("busb port power on\n");
+ 	if (!rport->suspended)
+ 		return 0;
+ 
+@@ -502,7 +573,7 @@ static int rockchip_usb2phy_power_off(struct phy *phy)
+ static int rockchip_usb2phy_exit(struct phy *phy)
+ {
+ 	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+-
++printk("busb rockchip_usb2phy_exit \n");
+ 	if (rport->port_id == USB2PHY_PORT_OTG &&
+ 	    rport->mode != USB_DR_MODE_HOST &&
+ 	    rport->mode != USB_DR_MODE_UNKNOWN) {
+@@ -514,11 +585,61 @@ static int rockchip_usb2phy_exit(struct phy *phy)
+ 	return 0;
+ }
+ 
++static int rockchip_usb2phy_set_mode(struct phy *phy, enum phy_mode mode , int submode)
++{
++	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
++	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
++	bool vbus_det_en;
++	int ret = 0;
++	if (rport->port_id != USB2PHY_PORT_OTG)
++		return ret;
++
++printk("busb rockchip_usb2phy_set_mode mode = %d,submode=%d\n",mode,submode);
++	switch (mode) {
++	case PHY_MODE_USB_OTG:
++		/*
++		 * In case of using vbus to detect connect state by u2phy,
++		 * enable vbus detect on otg mode.
++		 *
++		 * fallthrough
++		 */
++	case PHY_MODE_USB_DEVICE:
++		/* Disable VBUS supply */
++		rockchip_set_vbus_power(rport, false);
++		extcon_set_state_sync(rphy->edev, EXTCON_USB_VBUS_EN, false);
++		vbus_det_en = true;
++		break;
++	case PHY_MODE_USB_HOST:
++		/* Enable VBUS supply */
++		ret = rockchip_set_vbus_power(rport, true);
++		if (ret) {
++			dev_err(&rport->phy->dev,
++				"Failed to set host mode\n");
++			return ret;
++		}
++
++		extcon_set_state_sync(rphy->edev, EXTCON_USB_VBUS_EN, true);
++		/* fallthrough */
++	case PHY_MODE_INVALID:
++		vbus_det_en = false;
++		break;
++	default:
++		dev_info(&rport->phy->dev, "illegal mode\n");
++		printk("busb illegal mode\n");
++		return ret;
++	}
++
++	ret = property_enable(rphy->grf, &rport->port_cfg->vbus_det_en, vbus_det_en);
++
++	return ret;
++}
++
+ static const struct phy_ops rockchip_usb2phy_ops = {
+ 	.init		= rockchip_usb2phy_init,
+ 	.exit		= rockchip_usb2phy_exit,
+ 	.power_on	= rockchip_usb2phy_power_on,
+ 	.power_off	= rockchip_usb2phy_power_off,
++//	.set_mode   = rockchip_usb2phy_set_mode,
+ 	.owner		= THIS_MODULE,
+ };
+ 
+@@ -540,7 +661,7 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
+ 	delay = OTG_SCHEDULE_DELAY;
+ 	dev_dbg(&rport->phy->dev, "%s otg sm work\n",
+ 		usb_otg_state_string(rport->state));
+-
++	printk("busb rockchip_usb2phy_otg_sm_work %s otg sm work %d\n",usb_otg_state_string(rport->state),rport->state);
+ 	switch (rport->state) {
+ 	case OTG_STATE_UNDEFINED:
+ 		rport->state = OTG_STATE_B_IDLE;
+@@ -548,13 +669,16 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
+ 			rockchip_usb2phy_power_off(rport->phy);
+ 		/* fall through */
+ 	case OTG_STATE_B_IDLE:
++		printk("busb HOST = %d,VBUS_EN=%d,vbus_attached=%d\n",extcon_get_state(rphy->edev, EXTCON_USB_HOST),extcon_get_state(rphy->edev,EXTCON_USB_VBUS_EN),rport->vbus_attached);
+ 		if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) > 0) {
+ 			dev_dbg(&rport->phy->dev, "usb otg host connect\n");
++			printk("busb usb otg host connect\n");
+ 			rport->state = OTG_STATE_A_HOST;
+ 			rockchip_usb2phy_power_on(rport->phy);
+ 			return;
+ 		} else if (vbus_attach) {
+ 			dev_dbg(&rport->phy->dev, "vbus_attach\n");
++			printk("busb vbus_attach rphy->chg_state = %d\n",rphy->chg_state);
+ 			switch (rphy->chg_state) {
+ 			case USB_CHG_STATE_UNDEFINED:
+ 				schedule_delayed_work(&rport->chg_work, 0);
+@@ -689,7 +813,7 @@ static void rockchip_chg_detect_work(struct work_struct *work)
+ 	struct regmap *base = get_reg_base(rphy);
+ 	bool is_dcd, tmout, vout;
+ 	unsigned long delay;
+-
++printk("busb chg detection work state = %d\n",rphy->chg_state);
+ 	dev_dbg(&rport->phy->dev, "chg detection work state = %d\n",
+ 		rphy->chg_state);
+ 	switch (rphy->chg_state) {
+@@ -923,6 +1047,42 @@ static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
+ 	return IRQ_HANDLED;
+ }
+ 
++static irqreturn_t rockchip_usb2phy_id_irq(int irq, void *data)
++{
++	struct rockchip_usb2phy_port *rport = data;
++	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
++	bool cable_vbus_state = false;
++printk("brian rockchip_usb2phy_id_irq \n");
++	if (!property_enabled(rphy->grf, &rport->port_cfg->idfall_det_st) &&
++	    !property_enabled(rphy->grf, &rport->port_cfg->idrise_det_st))
++		return IRQ_NONE;
++
++	mutex_lock(&rport->mutex);
++
++	/* clear id fall or rise detect irq pending status */
++	if (property_enabled(rphy->grf, &rport->port_cfg->idfall_det_st)) {
++		property_enable(rphy->grf, &rport->port_cfg->idfall_det_clr,
++				true);
++		cable_vbus_state = true;
++	} else if (property_enabled(rphy->grf, &rport->port_cfg->idrise_det_st)) {
++		property_enable(rphy->grf, &rport->port_cfg->idrise_det_clr,
++				true);
++		cable_vbus_state = false;
++	}
++
++	extcon_set_state(rphy->edev, EXTCON_USB_HOST, cable_vbus_state);
++	extcon_set_state(rphy->edev, EXTCON_USB_VBUS_EN, cable_vbus_state);
++
++	extcon_sync(rphy->edev, EXTCON_USB_HOST);
++	extcon_sync(rphy->edev, EXTCON_USB_VBUS_EN);
++
++	rockchip_set_vbus_power(rport, cable_vbus_state);
++
++	mutex_unlock(&rport->mutex);
++
++	return IRQ_HANDLED;
++}
++
+ static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
+ {
+ 	struct rockchip_usb2phy_port *rport = data;
+@@ -980,7 +1140,8 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
+ 					  struct rockchip_usb2phy_port *rport,
+ 					  struct device_node *child_np)
+ {
+-	int ret;
++	int ret = 0;
++	int iddig;
+ 
+ 	rport->port_id = USB2PHY_PORT_OTG;
+ 	rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
+@@ -994,13 +1155,34 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
+ 	 */
+ 	rport->suspended = true;
+ 	rport->vbus_attached = false;
++	rport->vbus_enabled = false;
+ 
++	rport->vbus = devm_regulator_get_optional(&rport->phy->dev, "vbus");
++	if (IS_ERR(rport->vbus)) {
++		ret = PTR_ERR(rport->vbus);
++		if (ret == -EPROBE_DEFER)
++			return ret;
++		printk("busb Failed to get VBUS supply regulator\n");
++		dev_warn(&rport->phy->dev, "Failed to get VBUS supply regulator\n");
++		rport->vbus = NULL;
++	}
++	if(rport->vbus != NULL)
++		printk("busb get rport->vbus ok\n");
+ 	mutex_init(&rport->mutex);
+ 
+ 	rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1);
+ 	if (rport->mode == USB_DR_MODE_HOST ||
+ 	    rport->mode == USB_DR_MODE_UNKNOWN) {
+-		ret = 0;
++		if(rphy->edev_self) {
++			extcon_set_state(rphy->edev, EXTCON_USB, false);
++			extcon_set_state(rphy->edev, EXTCON_USB_HOST, true);
++			extcon_set_state(rphy->edev, EXTCON_USB_VBUS_EN, true);
++			ret = rockchip_set_vbus_power(rport, true);
++			printk("busb rockchip_set_vbus_power ret=%d\n",ret);
++			if(ret)
++				return ret;
++		}	
++		//ret = 0;
+ 		goto out;
+ 	}
+ 
+@@ -1044,6 +1226,37 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
+ 				"failed to request otg-bvalid irq handle\n");
+ 			goto out;
+ 		}
++
++		if (rphy->edev_self) {
++		
++			rport->id_irq = of_irq_get_byname(child_np, "otg-id");
++			if (rport->id_irq < 0) {
++				dev_err(rphy->dev, "no otg id irq provided\n");
++				ret = rport->id_irq;
++				goto out;
++			}
++
++			ret = devm_request_threaded_irq(rphy->dev, rport->id_irq, NULL,
++							rockchip_usb2phy_id_irq,
++							IRQF_ONESHOT,
++							"rockchip_usb2phy_id", rport);
++			if (ret) {
++				dev_err(rphy->dev, "failed to request otg-id irq handle\n");
++				return ret;
++			}
++
++			iddig = property_enabled(rphy->grf, &rport->port_cfg->utmi_iddig);
++			if(!iddig) {
++				extcon_set_state(rphy->edev, EXTCON_USB, false);
++				extcon_set_state(rphy->edev, EXTCON_USB_HOST, true);
++				extcon_set_state(rphy->edev, EXTCON_USB_VBUS_EN, true);
++
++				ret = rockchip_set_vbus_power(rport, true);
++				printk("busb rockchip_set_vbus_power ret=%d\n",ret);
++				if (ret)
++					return ret;
++			}
++		}
+ 	}
+ 
+ 	if (!IS_ERR(rphy->edev)) {
+@@ -1108,6 +1321,7 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
+ 	phy_cfgs = match->data;
+ 	rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ 	rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
++	rphy->edev_self = false;
+ 	platform_set_drvdata(pdev, rphy);
+ 
+ 	ret = rockchip_usb2phy_extcon_register(rphy);
+@@ -1329,6 +1543,17 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
+ 				.bvalid_det_en	= { 0xe3c0, 3, 3, 0, 1 },
+ 				.bvalid_det_st	= { 0xe3e0, 3, 3, 0, 1 },
+ 				.bvalid_det_clr	= { 0xe3d0, 3, 3, 0, 1 },
++				.bypass_dm_en	= { 0xe450, 2, 2, 0, 1 },
++				.bypass_sel	= { 0xe450, 3, 3, 0, 1 },
++				.idfall_det_en	= { 0xe3c0, 5, 5, 0, 1 },
++				.idfall_det_st	= { 0xe3e0, 5, 5, 0, 1 },
++				.idfall_det_clr	= { 0xe3d0, 5, 5, 0, 1 },
++				.idrise_det_en	= { 0xe3c0, 4, 4, 0, 1 },
++				.idrise_det_st	= { 0xe3e0, 4, 4, 0, 1 },
++				.idrise_det_clr	= { 0xe3d0, 4, 4, 0, 1 },
++				.ls_det_en	= { 0xe3c0, 2, 2, 0, 1 },
++				.ls_det_st	= { 0xe3e0, 2, 2, 0, 1 },
++				.ls_det_clr	= { 0xe3d0, 2, 2, 0, 1 },
+ 				.utmi_avalid	= { 0xe2ac, 7, 7, 0, 1 },
+ 				.utmi_bvalid	= { 0xe2ac, 12, 12, 0, 1 },
+ 			},
+diff --git a/include/linux/extcon.h b/include/linux/extcon.h
+index 2bdf643..1c8e971 100644
+--- a/include/linux/extcon.h
++++ b/include/linux/extcon.h
+@@ -37,6 +37,7 @@
+ /* USB external connector */
+ #define EXTCON_USB		1
+ #define EXTCON_USB_HOST		2
++#define EXTCON_USB_VBUS_EN		3
+ 
+ /*
+  * Charging external connector 

pinebook-pro.sh

@@ -261,12 +261,14 @@ cd "${basedir}"
 
 # Time to build the kernel
 cd "${basedir}"/kali-${architecture}/usr/src
-git clone https://gitlab.manjaro.org/tsys/linux-pinebook-pro.git --depth 1 linux -b v5.6
+git clone https://gitlab.manjaro.org/tsys/linux-pinebook-pro.git --depth 1
 cd linux
 touch .scmversion
 patch -p1 --no-backup-if-mismatch < "${basedir}"/../patches/pinebook-pro/0001-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch
+patch -p1 --no-backup-if-mismatch < "${basedir}"/../patches/pinebook-pro/0008-board-rockpi4-dts-upper-port-host.patch
+patch -p1 --no-backup-if-mismatch < "${basedir}"/../patches/pinebook-pro/0008-rk-hwacc-drm.patch
 patch -p1 --no-backup-if-mismatch < "${basedir}"/../patches/pinebook-pro/kali-wifi-injection.patch
-cp "${basedir}"/../kernel-configs/pinebook-pro-5.6.config .config
+cp "${basedir}"/../kernel-configs/pinebook-pro-5.7.config .config
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- oldconfig
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j$(nproc)
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- INSTALL_MOD_PATH="${basedir}"/kali-${architecture} modules_install
@@ -277,8 +279,8 @@ cp arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dtb "${basedir}"/kali-${arch
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- mrproper
 # And copy the config back in again (and copy it to /usr/src to keep a backup
 # around)
-cp "${basedir}"/../kernel-configs/pinebook-pro-5.6.config .config
-cp "${basedir}"/../kernel-configs/pinebook-pro-5.6.config ../default-config
+cp "${basedir}"/../kernel-configs/pinebook-pro-5.7.config .config
+cp "${basedir}"/../kernel-configs/pinebook-pro-5.7.config ../default-config
 cd "${basedir}"
 
 # Fix up the symlink for building external modules